Alfa Toptech Machines

Shappers Machine

MAIN FEATURES

The finest raw materials, the most advanced techniques and outstanding craftmanship all go into the making of Alfa Shapers. But Quality Control is the most vital factor; meticulous testing is carried out at every stage of manufacture. The reason why "ALFA" shapers always measure upto highest standards comparable to the fittest in the world.

Main Body	:	Comprises of well proportioned casting with internal ribbings. The Vertical Slides and Ram Slide have wide bearing surface in accurate alignment.
Ram	:	The Ram is of Heavy Cross section to resist cutting stresses. Alignment is preserved by well proportioned Vee Type earings. Adequate means of lubrication are provided and felt vipers are fitted to protect the Slides.
Tool Head	:	Can tilt upto 60° either side. It is easy to adjust and tool is automatically lifted when returning.
Cross Slide	:	Can traverse horizontal and vertical also. Horizontal motion can be had by automatic feed as well.
Table	:	The table universal is provided with Tee Slots on the top as well as on one side and has bolt holes on the other side. A special V-shaped support is provided for it to withstand heavy cuts. Table can revolve around it axes 360° making it complete universal.
Standard Accessories	:	One heavy duty Vice having one operating handle with motor pulley.

SPECIFICATIONS

Size	12" Inches mm	18" Inches mm	24" Inches mm	30" Inches mm	36" Inches mm	40" Inches mm
Length of stroke-Max.	14 256	20 508	26 660	32 813	38 965	42 1067
Length of Ram bearing column	19 484	28 711	32 813	36 914	41 1041	44 1118
Length of Ram without Tool Slide	30 762	37 940	48 1219	57 1448	77 1956	80 2020
Ram bearing width	81/2 216	10 254	12 305	13 300	131/2 343	14 356
No. of Ram speeds	3	3	3	3	3	3
No. of Ram speeds incase of Geared	4	4	6	6	6	6
No. of Ram strokes P.M.	30-100	28-90	25-80	10-70	7-60	5-50
Tool Holder Admits Tools		3/4 X 1/4 19x32	3/4 X 11/2 19x37	8 X 11/2 22x37	-	-
Length of Cross Slide	24 610	28 711	38 965	39 991	53 1346	54 1372
Width of Cross Slide	9 229	10 254	12 305	13 330	131/2 348	14 356
Length of Table	12 305	18 457	25 635	31 787	37 940	41 1041
Width of Table	9 229	12 305	16 406	16 406	18 457	18 457
Depth of Table	9 229	11 279	14 356	14 356	16 406	16 406
Cross Feed Power or by Hand	12 305	18 457	24 610	30 762	36 914	40 1016
Feed Length of Tool slide	5 127	6 152	9 229	9 229	12 305	12 305
Vice Admits	10 254	10 254	13 330	14 356	16 406	16 406
Overall Height	43 1092	55 1397	66 1676	70 1778	80 2032	85 2159
Overall Length	42 1067	62 1575	77 1956	70 1178	80 2032	85 2159
Overall Width	32 813	38 955	47 1194	50 1270	61 1575	64 1626
H.P. of Electric Motor	1 H.P.	2 H.P.	2 H.P.	3 H.P.	3 H.P.	3 H.P.
Dia of motor Pulley	2"	2 1/2"	2 1/2"	2 1/2"	2 1/2"	2 1/2"

Note : All specifications are approximate and subject to change without notice.

Drilling Machines

SPECIFICATIONS OF ALFA RADIAL DRILLING MACHINE

Drilling Capacity	25 mm	32 mm	40 mm	50 mm
Max-distance from spindle to coloum in	25"	33"	39"	49"
Max-distance from spindle to coloum	10”	12”	16”	20”
Max-distance from spindle to base plate	32”	37”	45”	53”
Max-distance from spindle to base plate	0	0	0	0
Diameter of Column	6”	71/2”	9”	10”
No of Spindle Speed	4 Single 4 Double	4 Single 4 Double	3 Single 3 Double	3 Single 3 Double
Range of Spindle Speeds	80/700 RPM	70/700 RPM	60/700 RPM	50/700 RPM
Working Surfase of base plate	18” x 30”	19” x 24”	20” x 32”	24” x 37”
Traval of Spindle Feed	6”	7”	9”	11”
Spindle more taper (No.)	3	4	4	5
Arm net to any angle upto	90⁰	90⁰	90⁰	90⁰
Floor Space Required	42” x 25”	42” x 25”	54” x 29”	60” x 29”
HP Recommended	1 HP	1	2 HP

Power Press

Piller Type Power Press Steel Body

Capacity In Tons	10 Ton mm	20 Ton mm	30 Ton mm	50 Ton mm	75 Ton mm	100 Ton mm	150 Ton mm	200 Ton mm	250 Ton mm
Bed Size (L-R x F-B)	300x325	350x400	400x450	450x500	525x550	600x650	650x675	750x800	800x1125
Bed to Ram Bottom	225	250	290	325	350	425	490	525	550
Stroke	50	65	70	90	100	115	125	138	145
Crank Shaft Dia	80	90	100	125	125	160	178	200	225
Bore in Bed	100	115	125	150	175	200	200	225	275
Gear Dia	450	525	610	675	790	900	950	1050	1125
Flywheel Dia	525	650	700	800	900	950	1125	1200	1300
No. of Stroke(P-M)	60	60	60	55	50	45	40	30	25
Motor H.P. Req.	2	2	3	5	7.5	10	15	15	20
Motor Pully	100	115	125	150	175	200	200	200	200
App. Weight	700 Kg.	1100 Kg.	1400 Kg.	1800 Kg.	2500 Kg.	3300 Kg.	4500 Kg.	6000 Kg.	9000 Kg.

Specification of 'C' Frame & Inclinable Type Power Presses

Capacity In Tons	5 Ton mm	10 Ton mm	20 Ton mm	30 Ton mm	50 Ton mm	75 Ton mm	100 Ton mm	150 Ton mm	200 Ton mm
Bed Size (F-B x L-R)	260x425	318x482	360x540	415x645	540x760	590x850	625x965	750x1050	800x1125
Bed to Ram Bottom	215	245	280	330	360	380	540	550	555
Stroke	40	51	65	70	90	100	115	140	145
Crank Shaft Dia	76	80	90	100	118	130	150	175	200
Bore in Bed	90	100	125	150	175	190	200	225	250
Gear Dia	350	450	525	600	650	750	900	965	1050
Flywheel Dia	450	525	600	650	775	900	950	1050	1200
No. of Stroke(P-M)	70	65	60	55	50	45	40	35	30
Motor H.P. Req.	1.5. H.P.	2. H.P.	3. H.P.	3. H.P.	5. H.P.	7.5. H.P.	10 H.P.	15. H.P.	15. H.P.
Motor Pully	100	115	125	150	175	200	200	200	200
App. Weight	600 Kg.	800 Kg.	1200 Kg.	1500 Kg.	2200 Kg.	2950 Kg.	4200 Kg.	5200 Kg.	7800 Kg